Digital Exhaust Temperature Gauge with a maximum reading of 1,250 °C

Features a black glass face with digital display that only becomes visible once the ignition has been turned on.

Gauge Diameter = 52mm

Example of how the "Amber Series" functions

Upon starting your vehicle the display initially shows you a vehicle voltage reading. After approximately 50 seconds the display switches over to the exhaust temperature setting. If the exhaust temperature is either less than 300°C or more than 900°C the display begins to flash. In 10 minute intervals the display reverts back to show you a vehicle voltage rating that is displayed for 50 seconds before the exhaust temperature is once again shown. During the 50 seconds that the voltage # is displayed you are still able to monitor the exhaust temperature by viewing the LED bar lights.

Green: 300 > 650°C (8 green LED´s) 
Yellow: 700 > 850°C (4 yellow LED´s) 
Red: 900 > 1,250°C (8 red LED´s) 

Should the vehicle voltage at any point drop below 11V the display with begin to flash with a red warning light and the current voltage will be shown. The voltage display mode will remain until the problem has been corrected.

All installation hardware is included.