Digital Boost Gauge - 3.0 Bar

Features a black glass face with digital display that only becomes visible once the ignition has been turned on. An electronic sensor ensures accurate boost pressure readings (not mechanically activated like most gauges)

Gauge Diameter = 52mm

Example of how the "Amber Series" functions

Upon starting your vehicle the display initially shows you a vehicle voltage reading. After approximately 50 seconds the display switches over to display the boost reading. If boost exceeds 1.5 Bar for more than 3 seconds the display will begin to flash. In 10 minute intervals the display reverts back to show you a vehicle voltage rating that is displayed for 50 seconds before the boost pressure is once again shown. During the 50 seconds that the voltage # is displayed you are still able to monitor the boost pressure by viewing the LED bar display.

Yellow: -1.0 > 0.0 Bar (6 yellow LED´s) 
Green: 0.2 > 1.4 Bar (7 green LED´s) 
Red: 1.6 > 2.8 Bar (7 red LED´s) 

Should the vehicle voltage at any point drop below 11V the display with begin to flash with a red warning light and the current voltage will be shown. The voltage display mode will remain until the problem has been corrected.