Parts included correspond to the following original part #'s:  6N0711061A, 6N0711090A, 6N0711611C

This camshaft set consists of one camshaft for your G60 engine and includes lube and specs.

Fits all G60 engines

- 272° duration
- 110° overlap (Intake/Exhaust)
- Lift 11.2 (Intake/Exhaust)
- Increase of 8-10 HP depending on overall condition of engine

Note: These are used camshafts that have been completely machined, refinished and hardened. A cost effect alternative for quick horsepower gains

Fits Passat (excluding Syncro), Golf II and Corrado.

Set includes front, right rear and left rear mounts. Replace them all at the same time and save yourself money!

This adjustable cam sprocket enables precise adjustments to your cam timing. Tweak your engine to provide you with the power band right where you want it!

May be used to fasten the water pump

Corresponds to the original VW part number N90221803

Fits G60 with 6 ribbed belt. Made of 6061 T6 Aluminum

Fits all G60 engines. Made of 6061 T6 Aluminum.

Fits G60 and G40 G-Lader

Price is per strip! When overhauling your G-Lader you will require 4 of these strips as well as 4 of the longer strips (Part # ES030145C440).

We recommend that when overhauling your G-Lader that you also updgrade the cog belt from the flimsy 8mm factory belt to the 12mm version  - AZMTNG606 (we strongly recommend changing this belt annually even when not overhauling your G-Lader!!!). 

It is important to note that as of 1993 these beige strips were utilized as opposed to the older grey versions which wore out much quicker.

Fits G60 and G40 G-Lader

Price is per strip! When overhauling your G-Lader you will require 4 of these strips as well as 4 of the shorter strips (Part # ES030145C490).

We recommend that when overhauling your G-Lader that you also updgrade the cog belt from the flimsy 8mm factory belt to the 12mm version  - AZMTNG606 (we strongly recommend changing this belt annually even when not overhauling your G-Lader!!!). 

It is important to note that as of 1993 these beige strips were utilized as opposed to the older grey versions which wore out much quicker.

Fits all G60 engines

Used to fasten the crank pulley/harmonic balancer on the crankshaft for the VR6

Corresponds to the original VW part numbers N0100873 and N0100875

Corresponds to the original VW part number N90544202 or N90544203

90 A alternator, fits all G60 engines. A core charge applies and will be refunded upon receipt of your old alternator.

Fits all G60 engines (Corrado, Passat and Golf)

Fits all G60 engines

Fits all engine codes PG, 2E & ADY (Corrado G60 & 2.0L)

Corresponds to the original VW part number 049109111C

Fits all G60 engines and includes a complete set to overhaul one engine

Corresponds to the original VW part number 034105701  007

Symbolbild

Fits all G60 engines

Fits all G60 engines

Corresponds to the original VW part number N90320802

Fits all G60 engines

Corresponds to the original VW part number 026198421

Corresponds to the original part number 1H0253115C

Fits all G60 engines and 4 units must be ordered per header

Corresponds to the original part number 028105269B

Fits G60, 16V 2.0L, MKA, 9A egnines, etc.

Golf, Passat, Transporter, Vento/Jetta III, Audi....

This is a heavy duty extra wide cogbelt for your G-Lader. It is not only 4mm wider than OEM but also stronger. We recommend that you replace this cog belt annually to help prevent a catastrophic failure of your G-lader.

Fits all G-Laders

Corresponds to the original VW part number 037145539A

Resembles the original part pictured - part #191145832D

Please note that the black hose pictured is the original part and the one being purchased is the blue one next to it.