Corresponds to the original part number 811611797

Corrado, Golf I, Golf II, GolfII, Passat, Golf IV, Vento, Jetta, Polo, Bora, New Beetle, Polo, Caddy, Scirocco, Audi 80, 90, 200, A3, A4, A6

M8 x 48 mm

Price is per unit

Corresponds to the original VW part number 893407237

For Rear Brakes

We recommend replacing the ABS ring any time that new rotors are installed. One ring is used per rotor.

Corresponds to the original VW part number 1J0614149

Will fit either right or left side. Fits all Corrado's with VIN up to 50S000362.

Corresponds to the original VW part number 1H0609721E

Fits either right or left side on the old model (i.e. G60) Corrado up to VIN 50S000361.

Corresponds to the original VW part number 1H0609721A

Not exactly as pictured. Includes hardware.

Please choose the applicable side and application.

Fits many models

Corresponds to the original VW part number 191615612B

Fits many models

Corresponds to the original VW part number 191615611D

Fits Corrado G60, 16V, 2.0L and VR6
Price includes wheel bearing set for one wheel!

Note: We recommend that wheels bearings are changed on both sides at the same time and that you closely inspect your axle stub when replacing them. Two sets are pictured!

Price includes two pairs 

Width 86.8 mm
Height 52.9 mm
Thickness 15.2 mm

Price includes two pairs 

Width 86.8 mm
Height 52.9 mm
Thickness 15.2 mm

Price includes two pairs 

Width 86.8 mm
Height 52.9 mm
Thickness 15.2 mm

Fits all models with plug-in sensor (mid '94 from chassis number R 003691 through 1995 for models equipped with ABS)

Fits all Corrado years and models. These are original Audi parts and all 3 pieces are included!

Price includes two pairs 

Width 119 mm
Height 69.5 mm
Thickness 19.3 mm

Price includes two pairs 

Width 119 mm
Height 69.5 mm
Thickness 19.3 mm

Fits Corrado G60, 2.0L and 16V
Price includes wheel bearing set for one wheel!

Note: We recommend that wheels bearings are changed on both sides at the same time and that you closely inspect your axle stub when replacing them. Two sets are pictured!

Fits Corrado G60, 2.0L and 16V
Price includes wheel bearing set for one wheel!

Note: We recommend that wheels bearings are changed on both sides at the same time and that you closely inspect your axle stub when replacing them. Two sets are pictured!

Fits Rear Brakes for Corrado's up to 7.95. Includes 2 pieces. Please order wheel bearings with rotors.

Fits Rear Brakes for Corrado G60. Includes 2 pieces. Please order wheel bearings with rotors.

Fits Rear Brakes for Corrado VR6. Includes 2 pieces. Please order wheel bearings with rotors.

Corresponds to original part # 535957803

ECE Approved. Set includes 4 pieces

Thickness 16.2 mm
Width 119.3 mm
Height 69.6 mm

These high performance ceramic brake pads may be used for street as well as racing applications. Highly resistant to fading with working temperatures exceeeding 650° C while still providing optimal cold braking performance. ECE–R 90 Certified.

ECE Approved. Set includes 4 pieces

Thickness 19.4 mm
Width 119.3 mm
Height 69.6 mm

These high performance ceramic brake pads may be used for street as well as racing applications. Highly resistant to fading with working temperatures exceeeding 650° C while still providing optimal cold braking performance. ECE–R 90 Certified.

For models with a one piece cable and sensor (mid '92 up to chassis number R 003690 for models equipped with ABS)

Fits all years

Load Sensitive

Applications: Vento, Golf III, Passat and Corrado VR6

inkl. ABE