Fits all models originally equipped with a 3rd brake light. May also be used to retrofit you vehicle if not so previously equipped. EC approved

Self-adhesive

Dimensions: approx. 80 mm x 27 mm

2.0L Throttle Body - 2E Engine found on Golf / Corrado / Vento equipped with automatic transmissions

Corresponds to the original VW part number 037133061AA

Corresponds to original part # 6Q3853803C61E

Universal application. Doorsill is made of a heavy foil that can be cut/trimmed to fit virtually any application.

Dimension: 885 mm x 86 mm

Corresponds to original part # 6Q3853804C61E

Universal application. Doorsill is made of a heavy foil that can be cut/trimmed to fit virtually any application.

Dimension: 885 mm x 86 mm

We recommend replacing the ABS ring any time that new rotors are installed. One ring is used per rotor.

Corresponds to the original VW part number 1J0614149

Fits for all models as well as in.pro headlights equipped with electric adjusters

Corresponds to the original VW part number 535941296

Will work with all manual adjusters for VW Corrado

Corresponds to the original VW part number 535941142

Fits all Corrado with old style interior

Corresponds to the original VW part number 53581970601C

May be used to fasten the water pump

Corresponds to the original VW part number N90221803

This aluminum gauge set includes 3 rings as well as installation instructions. Easy installation for Corrado (all years) as well as Passat und T4

Fits G60 and G40 G-Lader

Price is per strip! When overhauling your G-Lader you will require 4 of these strips as well as 4 of the longer strips (Part # ES030145C440).

We recommend that when overhauling your G-Lader that you also updgrade the cog belt from the flimsy 8mm factory belt to the 12mm version  - AZMTNG606 (we strongly recommend changing this belt annually even when not overhauling your G-Lader!!!). 

It is important to note that as of 1993 these beige strips were utilized as opposed to the older grey versions which wore out much quicker.

Fits G60 and G40 G-Lader

Price is per strip! When overhauling your G-Lader you will require 4 of these strips as well as 4 of the shorter strips (Part # ES030145C490).

We recommend that when overhauling your G-Lader that you also updgrade the cog belt from the flimsy 8mm factory belt to the 12mm version  - AZMTNG606 (we strongly recommend changing this belt annually even when not overhauling your G-Lader!!!). 

It is important to note that as of 1993 these beige strips were utilized as opposed to the older grey versions which wore out much quicker.

Dimensions: 165 mm / 90 mm / 25 mm

Corresponds to the original VW part number 4B0862534D5PR

Size:
180 mm x 60 mm x 5 mm

Corresponds to the original part number 8D98537422ZZ

Dimensions 70 mm / 15 mm / 3 mm

Corresponds to the original part number 8N0853601A

Fits all Corrado years and models. These are original Audi parts and all 3 pieces are included!

Fits all models/years equipped with automatic transmission

Corresponds to the original VW part number 535863209E4FB

M8 x 48 mm

Price is per unit

Corresponds to the original VW part number 893407237

Corresponds to the original part number N90433801

Fits all years/models Corrado on either the right or left side. This seals is mounted on the body, not the door.

Corresponds to the original VW part number 535837911A

Fits all years/models Corrado on either the right or left side. This seals is mounted on the body, not the door.

Corresponds to the original VW part number 357867365B

Used to fasten the crank pulley/harmonic balancer on the crankshaft for the VR6

Corresponds to the original VW part numbers N0100873 and N0100875

Corresponds to the original VW part number N90544202 or N90544203

Fits many models

Corresponds to the original VW part number 191615611D

Fits many models

Corresponds to the original VW part number 191615612B

Corresponds to the original part number 811611797

Corrado, Golf I, Golf II, GolfII, Passat, Golf IV, Vento, Jetta, Polo, Bora, New Beetle, Polo, Caddy, Scirocco, Audi 80, 90, 200, A3, A4, A6

Fits VW Corrado, Golf, Passat B3 and Jetta II

Corresponds to the original VW part number 037103493K

Fits all engine codes PG, 2E & ADY (Corrado G60 & 2.0L)

Corresponds to the original VW part number 049109111C

Include O2 sensor bung.

Original badge with self-adhesive. Dimensions: 95 mm x 31 mm

Corresponds to original part # 3B0853675A739

Aluminum. Includes 2 pieces

Original badge with self-adhesive. Dimensions: 135 mm x 30 mm

Corresponds to original part # 1C0853675GX2

Original badge with self-adhesive. Dimensions: 183 mm x 54 mm

Corresponds to original part # 1C0853675AGX2

Original badge with self-adhesive. Dimensions: 86 mm x 47 mm

Corresponds to original part # 3C0853675AE739

Original badge with self-adhesive. Dimensions: 95 mm x 31 mm

Corresponds to original part # 1J0853675AGGQF

Original badge with self-adhesive. Dimensions: 88 mm x 32 mm

Corresponds to original part # 8E0853601