|
 |
BASTUCK Stainless Steel Cat-back Exhaust Corrado G60 + 16V
"Gruppe A" Stainless Steel Cat-back exhaust system for your Corrado G60 or 16V
Weight: 15.00 kg
895.71 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
BASTUCK Stainless Steel Cat-back Exhaust for Corrado VR6
"Gruppe A" Stainless Steel Cat-back exhaust system for your Corrado VR6
Weight: 15.00 kg
895.71 USD per Complete System
895.71 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
BOSCH O2 Sensor for Corrado VR6 up to 10/94
Fits all VW Corrado VR6's up to 10/94
Item #: T0258003439
Weight: 0.50 kg
149.68 USD per piece
149.68 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
BOSCH O2 Sensor for VW Corrado VR6 older than 11/94
Fits all VW Corrado VR6's newer than 11/94
Item #: T0258003604
Weight: 0.50 kg
149.68 USD per piece
149.68 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Catalytic Converter - VW Corrado G60
Fits Corrado G60 models from 10/1988 to 01/1991
VIN: 50-K-000 001 to 50-M-008 149
Engine Code: PG
Item #: T90115036
Weight: 8.00 kg
547.69 USD per piece
547.69 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Catalytic Converter Deletion Pipe - 2.0l, 2.0l 16V, VR6, G60 Passat / Golf / Corrado
Include O2 sensor bung. 55mm diameter which is same as stock.
OFFROAD USE ONLY!
Item #: KAT3
Weight: 1.80 kg
81.81 USD per piece
81.81 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Catalytic Converter for VW Corrado VR6
Fits all years and includes additional installation hardware.
Item #: THJSVR6
Weight: 5.00 kg
607.17 USD per piece
607.17 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Cold Start Inclusion Kit - Corrado G60 04.88 - 06.95
Complete Cold Start Inclusion Kit to achieve D3 emissions levels for your Corrado G60 which will lower your road tax in Germany*.
* Check local vehicles emissions requirement to see if this applies to your specific situation
Item #: VA-PG
Weight: 0.80 kg
352.05 USD per complete set
352.05 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Cold Start Inclusion Kit Corrado 2.0l 115 HP (04.93-09.94)
EURO2 Conversion Kit
Reduce your road tax!
Item #: T20310045
Weight: 0.20 kg
163.58 USD per piece
163.58 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Downpipe/Cat. Gasket for G60, VR6 and 2.0L engines
Corresponds to the original part number 1H0253115C
Item #: T74839
Weight: 0.20 kg
10.07 USD per piece
10.07 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Exhaust Hanger for VW Corrado, Golf, Vento/Jetta III, Jetta II
Corresponds to the original part number 191253311
Item #: xc1214
Weight: 0.20 kg
6.44 USD per piece
6.44 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
FOX Stainless Steel Cat-back Sidepipe Exhaust Corrado G60
Full stainless steel cat-back exhaust system (2.5" / 63.5mm diameter) with dual driver's side exit. Dual tips are 70mm in diameter.
Item #: FXVW070041006
Weight: 15.00 kg
844.41 USD per Complete System
844.41 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Hartmann SS Dual Exhaust for VW Corrado 2.0L/16V+VR6 (Delivery time on request)
The new dual exhaust from Hartmann has finally arrived! This complete stainless steel exhaust system features 70mm tubing which results in less back-pressure and an increase of 8 HP. 3-Year warranty.
Item #: CHR3450S5
Weight: 22.00 kg
1.358.68 USD per Complete System
1.358.68 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Hartmann Stainless Steel Cat-back Exhaust Corrado 2.0l/16V+VR6
This exhaust system is your key to more power! Extensive R&D, including dyno testing, has created an exhaust that has the perfect diameter that not only increases your performance but also your fuel economy.
Item #: CHR3450S
Weight: 22.50 kg
1.073.19 USD per Complete System
1.073.19 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Hartmann Stainless Steel Cat-back Exhaust for Corrado G60
This exhaust system is your key to more power! Extensive R&D, including dyno testing, has created an exhaust that has the perfect diameter that not only increases your performance but also your fuel economy.
Item #: CHR1950S
Weight: 22.50 kg
1.073.19 USD per Complete System
1.073.19 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Mini-Cat (upgrade EURO1 to EURO2) Corrado G60, 2.0l, 16V, VR6
Emissions Upgrade Kit - go from EURO1 to EURO2
Reduce your road tax!
Weight: 0.20 kg
126.59 USD per piece
126.59 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Muffler Heatshield - VW Corrado - all years/models
Corresponds to the original part number 191803310B
Item #: xc1400
Weight: 0.50 kg
187.90 USD per piece
187.90 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Rubber Exhaust Hanger - VW
Fits various VW models
Item #: T83112094
Weight: 0.09 kg
3.13 USD per piece
3.13 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Rubber Exhaust Insulator - VW & AUDI
Fits many Audi and VW models
Item #: T83111121
Weight: 0.09 kg
2.99 USD per piece
2.99 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Supersport Stainless Steel Cat-back Exhaust for VW Corrado G60 / 1.8l 16V
"Gruppe A" Stainless Steel Cat-back Exhaust System.
20 different exhaust tips to choose from!
Item #: SU981403A
Weight: 24.00 kg
775.08 USD per Complete System
775.08 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Supersport Stainless Steel Cat-back Exhaust for VW Corrado VR6 / 2.0l 16V / 2.0l
"Gruppe A" Stainless Steel Cat-back Exhaust System.
20 different exhaust tips to choose from!
Item #: SU981403B
Weight: 24.00 kg
823.61 USD per Complete System
823.61 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
Supersprint Header Gasket - 16V
Fits 16V Supersprint headers.
Item #: SSprint001
Weight: 0.10 kg
30.37 USD per piece
30.37 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
WALKER Front Muffler for Corrado 16V
This muffler is a direct replacement for the OE unit and fits the following: 9A & KR up to 7/95
Item #: T13590
Weight: 2.00 kg
139.40 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
WALKER Front Muffler for Corrado 2.0L
This muffler is a direct replacement for the OE unit and fits the following: 2E & ADY up to 7/95
Item #: T13590
Weight: 2.00 kg
139.40 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
WALKER Front Muffler for Corrado VR6
This muffler is a direct replacement for the OE unit and fits the following. ABV, 140 KW (190) PS, 6 Cylinder up to 07/95
Item #: T18202
Weight: 2.00 kg
180.18 USD per piece
180.18 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
WALKER Middle and Back Muffler for Corrado VR6
This muffler is a direct replacement for the OE unit and fits the following: ABV, 140 KW (190 HP), 6 Cylinder up to 7/95
Item #: T18203
Weight: 15.00 kg
859.53 USD per piece
859.53 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
WALKER Middle Muffler for Corrado 16V
This muffler is a direct replacement for the OE unit and fits the following: 9A & KR, up to 07/95
Item #: T18199
Weight: 8.00 kg
428.45 USD per piece
428.45 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
WALKER Middle Muffler for Corrado 2.0L
This muffler is a direct replacement for the OE unit and fits the following: 2E & ADY, 4 Cylinder up to 07/95
Item #: T18199
Weight: 8.00 kg
428.45 USD per piece
428.45 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
WALKER Middle Muffler for Corrado G60
This muffler is a direct replacement for the OE unit and fits the following: PG, 118 KW (160 HP), 4 Cylinder
Item #: T16052
Weight: 8.00 kg
428.45 USD per piece
428.45 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
WALKER Muffler for Corrado 16V
This muffler is a direct replacement for the OE unit and fits all model years.
Item #: T18200
Weight: 8.00 kg
442.31 USD per piece
442.31 USD
excl.Shipping costs
|
|
| |
|
|
|
 |
WALKER Muffler for Corrado G60
This muffler is a direct replacement for the OE unit and fits all model years.
Item #: T18195
Weight: 8.00 kg
442.31 USD per piece
442.31 USD
excl.Shipping costs
|
|
| |
|
|
