Fits Passat (excluding Syncro), Golf II and Corrado.

Set includes front, right rear and left rear mounts. Replace them all at the same time and save yourself money!

Fits Vento/Jetta III, Golf III, Passat and Corrado.

Set includes front, right rear and left rear mounts. Replace them all at the same time and save yourself money!

Fits "new style" Corrado - 2.0L, 16 V and VR6 models

VR6 ABV with VIN greater than: F 50 N 000 001
9A 16V, 2E & ADY 2.0L wioth VIN greater than F 50 S 000 052

Corresponds to the original VW part number 1J0412249

Fits all Corrado 2.0l, 2.0l 16V and G60 models

Fits all Corrado VR6 models 

Fits many models

Corresponds to the original VW part number 191615611D

Fits many models

Corresponds to the original VW part number 191615612B

Corresponds to the original part number 811611797

Corrado, Golf I, Golf II, GolfII, Passat, Golf IV, Vento, Jetta, Polo, Bora, New Beetle, Polo, Caddy, Scirocco, Audi 80, 90, 200, A3, A4, A6

Fits all years Corrado VR6

Please choose side or both together

Fits all G60, 16V & 2.0L models

Please choose side or both together

We recommend that you purchase a new hex bolt (M8x26 - corresponding part # 1J0407175, also found in our store) when installing this part

Corresponds to the original VW part number 1J0407175

size: M12 x 1,5

Corresponds to the original VW part number N90635001

Fits all Corrado G60, 16V and 2.0L's

Fits all models/years. Core charge applies and is refunded once we receive your unit in exchange

Fits all models/years. Core charge applies and is refunded once we receive your unit in exchange

Core charge applies and is refunded once we receive your unit in exchange

Powerflex PU Suspension Bushing for the rear axle - fits VW Golf 2/Corrado/Jetta 2
Refer to part # 7 in picture. 2 are required per vehicle and price shown is for one unit. 

Outside bushing diameter is 45 mm with a center opening of 12 mm. Please double-check measurements on your specific vehicle prior to ordering. Thank you!

May be used for either the right or left side. Two wheel bearings are pictured and we suggest purchasing them both as it is recommended to change them on both sides.

Fits Corrado G60, 2.0L and 16V
Price includes wheel bearing set for one wheel!

Note: We recommend that wheels bearings are changed on both sides at the same time and that you closely inspect your axle stub when replacing them. Two sets are pictured!

Fits Corrado G60, 2.0L and 16V
Price includes wheel bearing set for one wheel!

Note: We recommend that wheels bearings are changed on both sides at the same time and that you closely inspect your axle stub when replacing them. Two sets are pictured!

Fits Corrado G60, 16V, 2.0L and VR6
Price includes wheel bearing set for one wheel!

Note: We recommend that wheels bearings are changed on both sides at the same time and that you closely inspect your axle stub when replacing them. Two sets are pictured!

May be used in Rack & Pinion or Recirculating Ball steering applications

Corresponds to the original VW part number AOF06300004

VOLKSWAGEN Corrado (53i) 09/88- (09/88-)
Engine Types: 1.8 16V,G60, 2.0 16V (85-118kW)
Lowering (FT/RR): 60mm/60mm
Max. Axle Load: 980Kg / 890Kg

VOLKSWAGEN Corrado (53i) 09/88- (09/88-)
Engine Types: 1.8 16V,G60, 2.0 16V (85-118kW)
Lowering (FT/RR): 40mm/40mm
Max. Axle Load: 980Kg / 890Kg

VOLKSWAGEN Corrado (53i) 09/88- (91-07/94)
Engine Types: 2.9 VR6 (140kW)
Lowering (FT/RR): 40mm/40mm
Max. Axle Load: 980Kg / 890Kg

VOLKSWAGEN Corrado (53i) 09/88- (09/88-)
Engine Types: 1.8-16V,G60,2.0-16V (85-118kW)
Lowering (FT/RR): 60mm/40mm
Max. Axle Load: 980Kg / 890Kg

Fits sway bars on the following models: Corrado G60, 16V and 2.0L

Corresponds to the original VW part number 191411329

Fits all Corrado G60, 16V and 2.0L's

Fits sway bars on all Corrado G60, 16V and 2.0L's

Corresponds to the original VW part number 861411331

Fits the following models on either the right or left side: Corrado G60, 16V and 2.0L

Please specify quantity required when ordering.

Fits all years/models from 1988 to1995. 

Lower sway bar is painted red and fits all years/models from 1988 to1995. 

Fits "ZF" steering racks used in the Corrado VR6, 16V, Golf, Vento and Jetta II

VW part number for comparison purposes: 1H0498020A